Shadowclad® Ultra features a factory applied exterior grade performance coating. Using a unique powder coating process on the panel face and edges means Shadowclad Ultra panels can be immediately top coated on site, eliminating (in most cases) the need for expensive and time consuming wet primers. H3 LOSP treated for vertical exterior applications, Shadowclad Groove features vertical 9mm wide grooves at 150mm centres across the face of the board. The Ultra coating is suitable for use with most paint and film forming stain systems. Always refer to your local coating manufacturer for coating advice.

The Ultra performance coating has a high 60-80 microns average film build, and can be up to 2 to 3 times thicker than traditional wet primers. This provides the undercoat of a 3 coat (1 undercoat, 2 top coats) paint system.

FEATURES & BENEFITS

  • Manufactured from sustainably grown plantation pine
  • Panels available in 2440mm and 2745mm lengths
  • Interlocking vertical shiplap joints for easy and weathertight installation
  • Low formaldehyde emission, Super E0: < 0.3mg/L as tested to AS/NZS 2098.11
  • FSC® certified (SCS-COC-001316)
  • Bandsawn sheet surface provides a consistent tactile finish
  • Shadowclad exterior cladding system includes a wide range of purpose designed exterior flashings
  • Shadowclad installation guidelines must be followed. Please refer to the current Shadowclad Specification and Installation Guide for Direct Fix or Cavity Wall Construction as applicable

COMPLIANCE

Shadowclad is manufactured under a third-party-audited quality control programme and is certified by the Engineered Wood Products Association of Australasia (EWPAA) as compliant with AS/NZS 2269 Plywood Structural.

RANGE

Groove
Finish Ultra
Nominal Thickness(mm) 12
Width (overall mm) 1216
Width(effective mm) 1200
Length 2440 or 2745
Sheets Per Pack 20 or 45
Cover / Eidth Tolerance (mm) +/-1
Weight (kg/m2) 6.6
R-value(m2.C/W) 0.104
Groove Profile N/A
Edge Profile Shiplap with weather groove
Treatment Available H3.1 LOSP (Azole)
H3.2 CCA (Ultra finish only)