Description
Shadowclad Natural Groove
Shadowclad plywood panels offer contemporary design solutions with the natural beauty and warmth of real wood. Made from Radiata pine, Shadowclad can be used as a strong, yet lightweight exterior cladding, or if untreated as interior wall & ceiling linings. We can supply (based on pre-order) Shadowclad Natural Groove, Natural Texture and Flashings.
Shadowclad Natural Groove is an uncoated panel suitable for staining and painting when used in applications exposed to weather. The Shadowclad Natural Groove product features a 9mm wide, 5mm deep groove profile every 150mm across the sheet. Shadowclad Natural Groove is H3 LOSP treated for use as a vertical exterior cladding Shadowclad Natural Groove adds the warmth, versatility and durability of wood to any residential or commercial project.
Features & Benefits
- Manufactured from sustainably-grown plantation pine
- Panels available in 2440mm and 2745mm lengths
- Interlocking vertical shiplap joints for easy and weathertight installation
- Low formaldehyde emission (E0)
- FSC® certified (SCS-COC-001316)
- Bandsawn sheet surface provides a consistent tactile finish
- Shadowclad exterior cladding system includes a wide range of purpose-designed exterior flashings
- CHH Woodproducts installation guidelines must be followed. Please refer to the current Shadowclad Specification and Installation Guide for Direct Fix or Cavity Wall Construction as applicable
Compliance
Shadowclad is manufactured under a third-party-audited quality control programme and is certified by the Engineered Wood Products Association of Australasia (EWPAA) as compliant with AS/NZS 2269 Plywood Structural.
Range
Shadowclad is manufactured under a third-party-audited quality control programme and is certified by the Engineered Wood Products Association of Australasia (EWPAA) as compliant with AS/NZS 2269 Plywood Structural.
Shadowclad Natural Texture
Shadowclad® Natural Texture is an uncoated panel suitable for staining and painting when used in applications exposed to weather. The Shadowclad Natural Texture product features a rough bandsawn face profile.
Shadowclad Natural Texture is suitable both as an exterior cladding (H3 LOSP), and for internal dry situations (untreated product) that may be painted, stained or clear coated. Shadowclad Natural Texture adds the warmth, versatility and durability of wood to any residential or commercial project.
- Manufactured from sustainably-grown plantation pine
- Panels available in 2440mm and 2745mm lengths
- Interlocking vertical shiplap joints for easy and weathertight installation
- Low formaldehyde emission (E0)
- FSC® certified (SCS-COC-001316)
- Bandsawn sheet surface provides a consistent tactile finish
- Shadowclad exterior cladding system includes a wide range of purpose-designed exterior flashings
- CHH Woodproducts installation guidelines must be followed. Please refer to the current Shadowclad Specification and Installation Guide for Direct Fix or Cavity Wall Construction as applicable
Compliance
Shadowclad is manufactured under a third-party-audited quality control programme and is certified by the Engineered Wood Products Association of Australasia (EWPAA) as compliant with AS/NZS 2269 Plywood Structural.
Range
Shadowcladis manufactured under a third-party-audited quality control programme and is certified by the Engineered Wood Products Association of Australasia (EWPAA) as compliant with AS/NZS 2269 Plywood Structural
Shadowclad Ultra Groove
Shadowclad® Ultra features a factory applied exterior grade performance coating. Using a unique powder coating process on the panel face and edges means Shadowclad Ultra panels can be immediately top coated on site, eliminating (in most cases) the need for expensive and time consuming wet primers. H3 LOSP treated for vertical exterior applications, Shadowclad Groove features vertical 9mm wide grooves at 150mm centres across the face of the board. The Ultra coating is suitable for use with most paint and film forming stain systems. Always refer to your local coating manufacturer for coating advice.
The Ultra performance coating has a high 60-80 microns average film build, and can be up to 2 to 3 times thicker than traditional wet primers. This provides the undercoat of a 3 coat (1 undercoat, 2 top coats) paint system.
FEATURES & BENEFITS
- Manufactured from sustainably grown plantation pine
- Panels available in 2440mm and 2745mm lengths
- Interlocking vertical shiplap joints for easy and weathertight installation
- Low formaldehyde emission, Super E0: < 0.3mg/L as tested to AS/NZS 2098.11
- FSC® certified (SCS-COC-001316)
- Bandsawn sheet surface provides a consistent tactile finish
- Shadowclad exterior cladding system includes a wide range of purpose designed exterior flashings
- Shadowclad installation guidelines must be followed. Please refer to the current Shadowclad Specification and Installation Guide for Direct Fix or Cavity Wall Construction as applicable
COMPLIANCE
Shadowclad is manufactured under a third-party-audited quality control programme and is certified by the Engineered Wood Products Association of Australasia (EWPAA) as compliant with AS/NZS 2269 Plywood Structural.
RANGE
| Groove | |
|---|---|
| Finish | Ultra |
| Nominal Thickness(mm) | 12 |
| Width (overall mm) | 1216 |
| Width(effective mm) | 1200 |
| Length | 2440 or 2745 |
| Sheets Per Pack | 20 or 45 |
| Cover / Eidth Tolerance (mm) | +/-1 |
| Weight (kg/m2) | 6.6 |
| R-value(m2.C/W) | 0.104 |
| Groove Profile | N/A |
| Edge Profile | Shiplap with weather groove |
| Treatment Available | H3.1 LOSP (Azole) H3.2 CCA (Ultra finish only) |
Shadowclad Ultra Texture
Shadowclad® Ultra features a factory applied exterior grade performance coating. Using a unique powder coating process on the panel face and edges means Shadowclad® Ultra panels can be immediately top coated on site, eliminating (in most cases) the need for expensive and time consuming wet primers. H3 LOSP treated for exterior applications, the Ultra coating is suitable for use with most paint and film forming stain systems. Always refer to your local coating manufacturer for coating advice.
The ultra performance coating has a high 60-80 microns average film build, and can be up to 2 to 3 times thicker than traditional wet primers. This provides the undercoat of a 3 coat (1 undercoat, 2 top coats) paint system.
FEATURES & BENEFITS
- Manufactured from sustainably grown plantaion pine
- Panels available in 2440mm & 2745mm lengths
- Interlocking vertical shiplap joints for easy and weathertight installation
- Low formaldehyde emission, Super E0: < 0.3mg/L as tested to AS/NZS 2098.11
- FSC® certified (SCS-COC-001316)
- Bandsawn sheet surface provides a consistent tactile finish
- Shadowclad exterior cladding system includes a wide range of purpose designed exterior flashings
- Shadowclad installation guidelines must be followed. Please refer to the current Shadowclad Specification and Installation Guide for Direct Fix or Cavity Wall Construction as applicable
COMPLIANCE
Shadowclad is manufactured under a third-party-audited quality control programme and is certified by the Engineered Wood Products Association of Australasia (EWPAA) as compliant with AS/NZS 2269 Plywood Structural.
RANGE
| Texture | |
|---|---|
| Finish | Ultra |
| Nominal Thickness(mm) | 12 |
| Width (overall mm) | 1216 |
| Width(effective mm) | 1200 |
| Length | 2440 or 2745 |
| Sheets Per Pack | 20 or 45 |
| Cover / Eidth Tolerance (mm) | +/-1 |
| Weight (kg/m2) | 6.6 |
| R-value(m2.C/W) | 0.104 |
| Groove Profile | N/A |
| Edge Profile | Shiplap with weather groove |
| Treatment Available | H3.1 LOSP (Azole) H3.2 CCA (Ultra finish only) |
